2.
Detailed introduction
,
Low temperature water bath
Technical parameters
Model
Heating power
Temperature control range
~
℃Temperature control accuracy℃
Temperature uniformity℃Power supply voltage
Working size
*
*
Pump flow/
,< br/> Low-temperature water bath
Instructions for use
Before use, please read the instructions carefully, become familiar with the instrument and control panel, and use a megohmmeter to measure whether there is poor insulation or short circuit in the power supply, plug, and grounding. Set the experimental temperature according to the temperature setting method. After the temperature is constant, the experiment can be started. For this constant temperature heating solution, it is best to use distilled water. It is forbidden to use river water and hard water. If tap water is used, the constant temperature pot should be cleaned after each use to prevent the accumulation of scale on the heater from affecting the constant temperature. Sensitivity
,
Low temperature water bath
Set temperature
Press the button to set or view the temperature set point. Press the key once and the digital tube characters will start to flash, indicating that the instrument has entered the setting state. Press the △ key to set the value to increase, press the ▽ key to decrease the set value. Press and hold the △ key or ▽ key and the data will change quickly. Press the key again to set the value. After returning to the normal working state and setting the temperature, you can turn on the heating and circulation pump switches. (If the temperature controller is an intelligent type, a separate temperature control manual is attached).
,
Low temperature water bath
Maintenance
When repairing the regulator and replacing the heating pipe, just remove the cover on the controller and replace it. The electrical part You should find a professional or return it to the factory for repair.
Our products are guaranteed for one year from the date of shipment and will be maintained for life.
low temperature water bath